The Cisco IOS interface Introduction to TCP/IP and Subnetting

Chapter 1: Internetworking

The Following written lab is covered in chapter 1:

1.1 Written Lab: OSI

1.2 Written Lab: Binary/Hexadecimal Practice

Chapter 2: introduction To TCP/IP

The Following written lab is covered in chapter 2:

2.1 written Lab: Introduction to TCP/IP

Chapter 3: The Cisco Interface

The Following hands-on labs are covered in chapter 3/;

3.1: Console Login

3.2: Router Examination Lab

3.3: Configuring Administrative Functions on your routers

3.4: Configuring your Router interface

3.5: Configuring your Catalyst Switches

3.6: Configuring your backbone router and verifying your internetwork

Chapter 4: Advanced IOS Management

The Following Hands-on labs are performed in chapter 4:

4.1 Copying the Cisco IOS to a TFTP host

4.2: Backing up and restoring the configuration of your routers and switch

4.3: Using CDP to find your neighbors

4.4: Telneting into multiple routers and switches simultaneously

4.5: Building and maintaining a hosts table

Chapter 5: IP Routing

The following written and hands-on labs are performed in chapter 5:

5.1: Static Routing and verification

5.2: RIP Routing and Verification

5.3: EIGRP Routing and Verification

5.4: OSPF Single Area Configuration & Verification

5.5: OSPF DR and BDR elections

5.6: written Lab: IP routing

Chapter 6: Advanced TCP/IP

The following written and hands-on labs are performed in chapter 6:

6.1: Written Lab: Class B Subnetting

6.2: Written La: VLSM Design

6.3: Implementing VKSM and Summarization

Chapter 7: Access Lists

The following hands-on labs are performed in chapter 7:

7.1 Configuring Standard IP Access-lists

7.2: Limiting VTY Access

7.3: Extended access-list configurations

Chapter 8: Networking Address Translation

8.1: Setting up Network Address Translation (NAT)

8.2: Dynamic NAT

8.3: Port Address Translation (PAT)

Chapter 9: Switching and VLANS

The following labs are covered in chapter 9:

9.1: configuring switching with VLANs and inter-VLAN Routing

9.2: Written Lab: Switching

Chapter 10: Introduction to Wireless LANs

The following labs are covered in chapter 10:

10.1: Written Lab: Introduction to Wireless

Chapter 11: Introduction to IPv6

The following labs are covered in chapter 11:

11.1: configuring basic IPv6

11.2: Written Lab: IPv6

Chapter 12: Cisco wide Area Network Support (WANs)

The following written and hands-on labs are covered in chapter 12:

12.1: configuring PPP with Authentication

12.2: configuring frame Relay

12.3: Verifying Frame Relay